The SP10F4 is a lumped element surface mount Flatpack 4 way power divider-splitter that covers the frequency range of 5-1000 Mhz. A power divider-combiner will divide a signal or combine two signals with a nominal-theoretical loss of 6.0 dB and isolation provided between output ports. The RF power divider can also be used as power combiner under certain conditions. This RF Flatpack surface mount power divider-splitter has a 50 Ohm nominal impedance and a maximum input power of 1 Watt as power divider. This Flatpack surface mount power divider-combiner is optimized for wide bandwidth with high isolation, low insertion loss, good VSWR match and excellent phase and amplitude balance. The Flatpack surface mount can be installed using reflow, wave soldering methods or manual hand solder.
Data Sheet: View PDF file for Dimensions and Specifications.